Flagship Marine
CALL TOLL FREE
1-800-316-6426
Chillers Air Cooled
Flagship Marine Air-Cooled, Weather-Resistant, Roof-Mounted Systems
All components but the condenser blower are in the air-conditioner side of our units to prolong component life.
60,000 BTU(5 TON) uni
60,000 BTU(5 TON) unit shown - available in 208/230, 265, 380/420, 440/460, 575 volts - three phase, 50 or 60Hz - This is a roof mounted unit - alternate styles available.
16 gauge stainless steel louvers
Flagship Marines exclusive rolled 16 gauge stainless steel louvers result in greatly reduced air turbulence and greater air flow.
When real estate is in short supply, as it always is, how about ten tons (120,000BTUs) of air cooled chilled water on a 22"x 28" footprint.

The outside panel features a six-row copper/copper condenser with six HP of blowers to accommodate the most extreme conditions.


The inside panels are all removable for easy access to everything, and the eye-level, convenient electric box has ALL of the electrical components inside.

How about 30 tons of air-cooled chilled water on an incredible 22"x 84" footprint? Flagship Marine can do it.
All sheet metal components are laser cut with aircraft/military quality tolerances in the ten-thousandths of an inch range as depicted here with the skeleton of an air-cooled chiller. Note the PEM nut inserts and numerous stainless steel rivets that result in a very rigid, strong and exacting structure.
Chiller Unit - Air Cooled
Model
CWAC = Chiller Water air cooled
SSAC = Split System air cooled
(condensing unit only)
BTUs of
Cooling
Length in inches
Width in inches
Height in inches
Amps (cool) 230v
Weight lbs
24,000
42
39
28
225
60,000
43
38
14
350
FM60SSAC
60,000
40
26
24
19
120,000
43
38
53
28
475
FM120SSAC-V
120,000
57
40
28
32
475
120,000
43
60
28
32
475
FM120SSAC-H
120,000
78
40
48
32
475
180,000
43
38
78

525
FM180SSAC
180,000




525
240,000
43
60
53

675
FM240SSAC
240,000
675
360,000
43
60
78

875
FM360SSAC
360,000
875

Copper Nickel socolets
Flagship Marine takes no shortcuts
with quality and design!


   All condenser tube to manifold connections are made with precision machined 90/10 CuNi (Copper Nickel) socolets that are TIG welded to the schedule 80 90/10 CuNi nipple with a monel alloy and brazed to the condenser tubes to ensure many years of trouble free service.

   This configuration meets all MilSpec and ABYC requirements. Naked connections aren't nearly as durable and fail to meet those standards.
   For your convenience all manifolds are fitted with reducing couplers and a 3/4" drain plugs for winterizing.

Welded elements
Welded elements
Expansion Valve
EXPANSION VALVES VS. CAPILLARY TUBES


All Flagship Marine equipment incorporates expansion valves which adjust the modulation of the refrigerant to match the conditions of sea water, humidity and ambient temperature. This maximizes performance by preventing excessive or inadequate refrigerant head pressures, resulting in more cooling and extended component life!
This is why all new HVAC equipment must now use expansion valves instead of the capillary tubes you may still have in your home air conditioner.
We don't "cut corners" - these cost us about $75-175 each vs a $3.00 cap tube, and on the larger units we use "balanced port" rather than the standard expansion valves which automatically adjust to the amount of refrigerant flowing rather than being a fixed flow and out of balance.

Capillary tubes cannot adjust the refrigerant modulation which is fixed by the physical length of the tube. Like a broken clock that is right only twice a day, capillary tubes either over-modulate or under-modulate the refrigerant as the sea water temperatures vary. As an extreme example, if you are in upper Mississippi when the water is 40° and the air is 95° the modulation will be excessive and the head pressure much too low. Expansion valves adjust the modulation according to the conditions.
No Capillary Tubes
Dry Drain Pan
Flagship Marine Exclusive: Dry Drain Pan
No more mold and mildew starting in your drain pan!
We now manufacture sloped aluminum drain pans that are dry so the condensate water doesn't have a chance to grow mold and mildew.
sheet metal components
All sheet metal components are laser cut with aircraft/military quality tolerances in the ten-thousandths of an inch range as depicted here with the skeleton of an air-cooled chiller. Note the PEM nut inserts and numerous stainless steel rivets that result in a very rigid, strong and exacting structure.
VARIABLE FREQUENCY DRIVES AND DIGITAL SCROLL COMPRESSORS?
Variable Frequency Drives
If your vessel is wired single phase or you have marginally sized generators, or if you want to almost completely eliminate voltage fluctuation when compressors start, we can install Variable Frequency Drives (VFDs) in our equipment. 
The VFD reduces the start up inrush and will greatly reduce any brown out, generator lag or flickering in your TV when the compressors start. 
The typical inrush (millisecond start up amperage) is about 5-7 times the running amps, however with a VFD the compressor frequency slowly ramps up to the 60 HZ speed so the inrush is typically about 1.3 times the running amps.  You can also manually program in lower or higher frequencies as well to accomplish running on lower amps or more output at higher amps if you need to, but of course you will lose or gain proportional performance by doing so.
Flagship Marine strives to provide the most simple, trouble free and durable equipment available, and frequency drives are not in keeping with the KISS principal that guides our component selection and design, however there are applications that warrant these excellent products.

Diagnostic Monitor with ICM Modules
Flagship's Exclusive Diagnostic Monitors Use
Time Tested "Over the Counter" ICM Modules
No Printed Circuits
With Flagship there are no expensive proprietary printed circuit boards.
No highly trained technician needed, typically a voltmeter and a
screwdriver is all that is needed to make most repairs!
All Flagship Chillers have a low voltage control module with clearly labeled LEDs advising the end user specifically what has tripped the chiller, be it high or low refrigerant pressure, freeze control protection as well as low chilled water flow. Diagnostic Monitor Panle
Programable Digital Control

Our new digital control is programmable or you can override the programs and manually control the temperature.

In addition to a host of features it has a back-lit screen for programming even in the dark.

ANY four wire battery-operated control will operate ANY Flagship Marine Unit

Personalize Your Thermostat

We will laser etch your vessel name here
for only $35.00

Personalize Your Thermostat
Questions? Our Customer Service & Tech Support Team is Here to Help
800-316-6426 | sales@flagshipmarine.com

Flagship Marine, Inc., 2427 SE Dixie Hwy., Stuart, Florida 34996 - USA
Phone: 772-283-1609 Fax: 772-283-4611 Wats: 800-316-6426 sales@flagshipmarine.com

Copyright © 1995-2018 Flagship Marine, Inc. All Rights Reserved