Excellence in Marine Engineering Since 1995!

Home Page    Chiller Systems  •  Self-Contained Systems  •  Marine Pumps  •  Air-Cooled Systems

 Commercial Operators High-Pressure Systems  •  Commercial/Military Operators  •  Installation Do's & Don'ts

Electric heat vs. Reverse Cycle    How to Size Your Boat    Coleman/RVP Air-Cooled Rooftop AC


 Flagship Marine is a Worldwide Distributor for the SeaMach and other fine RVP Coleman® - Mach® products

 
 (Español)


SeaMach Air Cooled Marine Rooftop a/c -13,500 BTUs of cooling with heat, ceiling assembly, controls and installation kit for only $929.95!
"Factory Direct Pricing" to OEMs, Commercial Operators, the Military & Individual Consumers

 

 Built to be "worth its salt" under the toughest marine conditions.


Turn your boat's cabin into a cool refuge from the heat of the day with a SeaMach Marine Air Conditioner - manufactured by the legendary industry leader - RVP - Coleman® Mach®.

Built with extra protection against the vibration and saltwater corrosion that come with the territory on a boat, the SeaMach is an investment in quality you can rely on, season after season.

SeaMach features a powerful 13,500 BTU cooling capacity, a quiet, high efficiency rotary compressor with a very low start up surge, and it can be equipped with an Elect-A-Heat option that will take the chill off your cabin on cooler outings.

Manufactured by the long time industry leader for recreational vehicles and off-road RV applications, SeaMach is tough enough to give you years of cool comfort below deck.

 

Here's what makes SeaMach a sea-worthy performer -

unique and highly superior to a standard rooftop unit:

 

The blower motor features a stainless steel shaft and plastic fan blade rather than steel, and is totally enclosed in an epoxy coated housing.

Plastic drain pan rather than steel.

Baked enamel coated condensers that protect the aluminum fins from deterioration rather than naked aluminum condenser fins.

Flexible refrigeration hoses provide better shock protection rather than pipe with soldered joints that can break under stress.

The compressor is supported to withstand the impact forces a moving vessel will encounter.

All exposed sheet metal parts are electrostatically powder coated rather than baked enamel.

Hard start capacitor makes starting much easier on your vessel's power supply and generator.

Simple to install with common hand tools - one 14" square opening - one power supply wire!

MagnaGard screws are chemically treated to resist corrosion.

Dow Corning protective agent seals all exposed metal parts.

Raised-lance fins on the coils increase the surface area available for heat transfer, enhancing the efficiency of the cooling process.

Quiet, easy to start, rugged and efficient rotary compressor.

New and improved hail and UV resistant polyethylene exterior shroud

 

 

 Inside the vessel all you see is an attractive ceiling mounted control & air distribution assembly

 

 
 Specifications

BTUH Nominal Capacity
Cooling.........................................13,500
Heating...........................................5,600

Electrical rating.....115VAC, 60Hz, 1 Phase

Cooling full load amps
Compressor.......................................11.5
Fan Motor.....................low: 2.8, High 3.4
Total.................................................14.9

Heating full load amps........................16.1

Running Watts (Cooling- low)...........1,680
Running Watts (Cooling- high)..........1,875
Running Watts (Heating)...................1,900

Compressor Locked rotor amps..............67

Compressor Ohm ratings
Common/start...................................3.38
Common/run......................................0.6

Thermostat temperature range
Cooling......................61°F +/-5 minimum
Heating......................85°F +/-5 maximum

Metering device..................Capillary Tube

Refrigerant Charge.......................17.5 Oz

Refrigerant Type.............................R-410A

Evaporator air delivery...............330 CFM

Dimensions:

Exterior shroud - 13.25" high x 29" wide x 43" long

Interior ceiling assembly - 2.1"high x 19.9"wide x 20.1"long

Ceiling cutout opening size - 14" x 14"

Installed weight...........................104 lbs

Our temporary discount price is only $929.95!

This price Includes:

Attractive interior ceiling assembly distributes air fore and aft

Water seal rubber compression gasket

Hi Cool - Low Cool - Heat - Off and thermostat control switches

Safe and reliable electric heating element

Complete installation hardware kit

Detailed and easy to follow installation manual

 

All you need to add is a 115 volt power supply!

We ship anywhere!

No sales tax unless shipped to a Florida address.

Order online - sales@flagshipmarine.com - or call:

Phone: 772-283-1609

Fax: 772-283-4611

Watts: 800-316-6426

Stuart, Florida, USA

 Also Available - 240/50Hz - non-marine applications:
International "Mach 3 PLUS" Truck/Camper unit - 240VAC @50HZ charged with environmentally friendly R-407C refrigerant at "Factory Direct Prices" - We ship anywhere! Click here for details.


 Click here for a printer-friendly PDF version of this page.
 Click here to download Adobe®Acrobat®Reader® software for free!



Flagship Marine, Inc., 2427 SE Dixie Hwy., Stuart, Florida 34996 - USA
Phone: 772-283-1609 Fax: 772-283-4611 Wats: 800-316-6426
sales@flagshipmarine.com
Copyright © 1995-2017 Flagship Marine, Inc. All Rights Reserved.