Pumps Archives - Flagship Marine

March Mag Drive 17 GPM Pump TE-5M-MD 1Ph 115V/230

admin — Mon, 30 Sep 2024 15:41:36 +0000

March Pump’s industrial TE-5M-MD is an American seal-less centrifugal magnetic drive pump ideal for marine applications. It is capable of generating a maximum flow of 17 gallons per minute at 4 feet, and its maximum head is 29 Feet (12PSI). It is capable of 50,000 BTU per hour. The standard wet end (the materials that come into contact with the solution) is composed of Noryl, Polypropylene, Carbon, Viton, 316 Stainless Steel, Ceramic, and Ceramic Magnet. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 60 hertz 115/230V and 50 hertz 110/220V 0.2 horsepower totally enclosed fan cooled motor. There are performance differences between the hertz options. The pump can be purchased with the motor’s standard conduit box, a 72 inch cord and 115V plug, or a 72 inch 230 cord. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius.

The pump is Ignition Protected per SAE J1171 and ISO 8846. The impeller has a carbon bushing allowing the pump to run dry longer before suffering damage.

System: 60Hz
US Metric
Max Flow: 18 GPM 68.1 LPM
Max Head: 29 FT 8.85 M
Power: 0.2 HP 0.149 KW

System: 50Hz
US Metric
Max Flow: 15.9 GPM 60.5 LPM
Max Head: 20.7 FT 6.3 M
Power: 0.2 HP 0.149 KW

Electrical/Air: 1Ph 115/230V 60Hz, 1Ph 110/220V 50Hz,
Inlet: 1″FPT
Outlet: 1/2″MPT
Wet End: Noryl (Front Housing), Polypropylene (Rear Housing, Impeller), Carbon (Bushing) Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic (Thrust Washers), Ceramic Magnet
Max Internal Pressure: 50 PSI / 3.4 bar
Max Liquid Temperature: 190 °F / 87 °C
Ignition Protected per SAE J1171 and ISO 8846: Rated IP 44
UL Listed Motor:
Note: Product image may be different than actual product received.

The post March Mag Drive 17 GPM Pump TE-5M-MD 1Ph 115V/230 appeared first on Flagship Marine.

March Mag Drive 17 GPM Pump AC-5M-MD 115V/230

admin — Mon, 30 Sep 2024 14:31:33 +0000

March Pump’s industrial AC-5M-MD is an American seal-less centrifugal magnetic drive pump ideal for marine applications. It is capable of generating a maximum flow of 17 gallons per minute at 1 feet, and its maximum head is 27 Feet (11PSI). It is capable of 48,000 BTU a hour. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Noryl, Buna N, Carbon, 316 Stainless Steel, Ceramic, and Ceramic Magnet. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius.

The pump is Ignition Protected per SAE J1171 and ISO 8846. The impeller has a carbon bushing allowing the pump to run dry longer before suffering damage.

System: 60Hz
US Metric
Max Flow: 17 GPM 64.4 LPM
Max Head: 27 FT 8.2 M
Power: 0.125 HP 0.093 KW

System: 50Hz
US Metric
Max Flow: 15.9 GPM 60 LPM
Max Head: 19.7 FT 6 M
Power: 0.125 HP 0.093 KW

Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 1″FPT
Outlet: 1/2″MPT
Wet End: Polypropylene (Rear Housing, Impeller), Noryl (Front Housing) Buna N (O-Ring), 316 Stainless Steel (Shaft), Carbon (Impeller Bushing) Ceramic (Thrust Washers), Ceramic Magnet
Max Internal Pressure: 50 PSI / 3.4 bar
Max Liquid Temperature: 190 °F / 87 °C
Ignition Protected per SAE J1171 and ISO 8846: UL Listed Motor
Note: Product image may be different than actual product received.

The post March Mag Drive 17 GPM Pump AC-5M-MD 115V/230 appeared first on Flagship Marine.

March Mag Drive 15 GPM Pump LC-5M-MD 115V/230

admin — Mon, 30 Sep 2024 14:09:44 +0000

March Pump’s industrial LC-5M-MD is an American submersible seal-less centrifugal magnetic drive marine pump. It is capable of generating a maximum flow of 15 gallons per minute at 2 feet, and its maximum head is 27 Feet (11PSI). It is capable of 45,000 BTU a hour. The LC-5C-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Noryl, Buna N, Stainless Steel, Carbon, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Noryl, and the Cord are also in contact with the solution. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius.

The pump is Ignition Protected per SAE J1171 and ISO 8846. The impeller has a carbon bushing allowing the pump to run dry longer before suffering damage.

System: 60Hz
US Metric
Max Flow: 14.5 GPM 54.9 LPM
Max Head: 27 FT 8.2 M
Power: 0.125 HP 0.093 KW

System: 50Hz
US Metric
Max Flow: 14.5 GPM 54.8 LPM
Max Head: 19.6 FT 6 M
Power: 0.125 HP 0.093 KW

Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 1″FPT
Outlet: 1/2″MPT
Submersible: Yes
Wet End: Polypropylene (Rear Housing, Impeller), Noryl (Front Housing) Buna N (O-Ring, Cooling Tube Seal), 316 Stainless Steel (Shaft, Cooling Tube), Carbon (Impeller Bushing), Ceramic (Thrust Washers), Ceramic Magnet
Uses: Submersible or Open Air
When submerged, the following is also in contact with the solution: Epoxy, Noryl, Cord
Max Internal Pressure: 25 PSI / 1.7 bar
Max Liquid Temperature: 130 °F / 54 °C
Ignition Protected per SAE J1171 and ISO 8846: Rated IP67
UL Listed Motor:
Note: Product image may be different than actual product received.

The post March Mag Drive 15 GPM Pump LC-5M-MD 115V/230 appeared first on Flagship Marine.

March Mag Drive 8.5 GPM Pump LC-3M-MD 115V/230

admin — Mon, 30 Sep 2024 10:13:04 +0000

March Pump’s industrial LC-3M-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 8.5 gallons per minute at 4 feet, and its maximum head is 19 Feet (8PSI). It is capable of 24,000 BTU a hour. The LC-3M-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Cupric Nickel, Carbon, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Stainless Steel, Polysulfone, and the Cord are also in contact with the solution. The inlet connection is 3/4 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 25PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius.

The pump is Ignition Protected per SAE J1171 and ISO 8846. The impeller has a carbon bushing allowing the pump to run dry longer before suffering damage.

System: 60Hz
US Metric
Max Flow: 8.5 GPM 32.2 LPM
Max Head: 19 FT 5.8 M
Power: 0.05 HP 0.037 KW

System: 50Hz
US Metric
Max Flow: 8.2 GPM 31 LPM
Max Head: 14.1 FT 4.3 M
Power: 0.05 HP 0.037 KW

Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/4″FPT
Outlet: 1/2″MPT
Submersible: Yes

Wet End: Polypropylene (Front and Rear Housing, Impeller), Cupric Nickel (Cooling Tube), Buna N (O-Ring, Cooling Tube Seal), Carbon (Impeller Bushing) Ceramic (Shaft, Thrust Washer), Ceramic Magnet
Uses: Submersible or Open Air
When submerged, the following is also in contact with the solution: Epoxy, Stainless Steel, Polysulfone, Cord
Max Internal Pressure: 25 PSI / 1.7 bar
Max Liquid Temperature: 130 °F / 54 °C
Ignition Protected per SAE J1171 and ISO 8846: Rated IP 67
UL Listed Motor:
Note: Product image may be different than actual product received.

The post March Mag Drive 8.5 GPM Pump LC-3M-MD 115V/230 appeared first on Flagship Marine.

March Mag Drive 5 GPM Pump LC-2M-MD 115V/230

admin — Mon, 30 Sep 2024 08:25:07 +0000

March Pump’s industrial LC-2M-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (5.5PSI). It is capable of 12,000 BTU per hour. The LC-2M-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Nylon, Viton, Buna N, Stainless Steel, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Buna N, and the Cord are also in contact with the solution. The inlet connection is 3/8 inch female pipe thread and 3/4 inch male pipe thread, and the outlet is 1/4 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.02 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 25PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius. The March LC-2M-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March LC-2M-MD is suitable for your application, please contact March Pump.

System 60Hz
US Metric
Max Flow 5 GPM 18.9 LPM
Max Head 13 FT 4 M
Power 0.02 HP 0.015 KW

System 50Hz
US Metric
Max Flow 4.9 GP 18.5 LPM
Max Head 8.9 FT 2.7 M
Power 0.018 HP 0.014 KW

Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/8″FPT & 3/4″MPT
Outlet: 1/4″MPT
Submersible: Yes
Wet End: Polypropylene (Front Housing, Impeller), Nylon (Rear Housing) Viton (O-Ring), Buna N (O-Ring, Cooling Tube Seal), 316 Stainless Steel (Shaft, Cooling Tube), Ceramic (Thrust Washer), Ceramic Magnet
Uses: Submersible or Open Air
When submerged, the following is also in contact with the solution: Epoxy, Buna N, Cord
Max Internal Pressure: 25 PSI / 1.7 bar
Max Internal Temperature: 130 °F / 54 °C
Ignition Protected per SAE J1171 and ISO 8846: Rated IP67
UL Listed Motor:
Note: Product image may be different than actual product received.

The post March Mag Drive 5 GPM Pump LC-2M-MD 115V/230 appeared first on Flagship Marine.

Cal Marine (Little Giant) 1200 GPH Marine Pump MS1200 115V

admin — Fri, 21 Jul 2023 17:05:03 +0000

Cal Marine (Little Giant) are certified to the following standards: UL, CE, ABYC and U.S. Coast Guard. Prices include mounting bracket.

Details:

• Designed for pumping water through the condenser coil for marine air conditioners
• NEW – Oil FREE Design
• NEW – PSC (Permanent Split Capacitor)
• Premium stainless steel and bronze construction for longevity
• 115 Volts 60 hZ – 6ft power cord – 3 wire; black, white, green ( NO PLUG ON END )
• Thermal Protection
• Suitable for fresh or Saltwater marine applications
• Extremely quiet operation
• Use submerged or in open air (must be installed below water level)
• Operate either horizontal or volute down (do not install pump and operate with volute up)
• Fluoroelastomer (FKM) seals suitable for harsh marine applications
• 3/4″ MPT Intake and 1/2″ MPT Discharge

Specifications: Max Flow Rate – 60 Hz 19.17 gpm / 1150 gph / 4353 Lph / 72.55 Lpm / 4.35 m³/h

Approximate dimensions: 4.85″ ⌀ x 6.5″ L

Performance Chart:

• Full load watts: 105
• Max Flow Rate – 60 Hz 19.17 gpm / 1150 gph / 4353 Lph / 72.55 Lpm / 4.35 m³/h
• Shut Off Height – 60Hz 20 ft / 6.1 m

The post Cal Marine (Little Giant) 1200 GPH Marine Pump MS1200 115V appeared first on Flagship Marine.

March 1Phase Mag Drive 1620 Gph Pump TE-5C-MD 115v/230V With WEG Motor

admin — Mon, 15 Feb 2021 08:29:35 +0000

March Pump’s industrial TE-5C-MD-AC is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1-inch female pipe thread, and the outlet is 3/4 inch male pipe thread. The standard motor is a 1 Phase 115/230V 0.2 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD-AC centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. This pump can be used as a replacement for a Dometic Cruisair pump as well as Mermaid, King-Aire and Aqua-Air. To determine if the March TE-5.5C-MD-AC is suitable for your application, please contact us toll-free 800-316-6426.

Applications:

Chemical recirculation – Chemical transfer – Bicarbonate systems – Deionized water systems – Refrigerators – Scrubber systems – Detergent mixers – Computer cooling – Silver recovery systems – Marine air conditioners.

Specifications:

Hp:0.2
Intake x Discharge: 1″ x 1/2″
Can be wired for 115v or 230v
GTIN:
015000040200

Performance Chart:
Gph @ 1’……..1620
Gph @ 10’……1380
Gph @ 20’……1128
Gph @ 30’……900

The post March 1Phase Mag Drive 1620 Gph Pump TE-5C-MD 115v/230V With WEG Motor appeared first on Flagship Marine.

Barb Kit for March TE5.5

admin — Mon, 21 Dec 2020 18:54:30 +0000

Barb Kit for the March TE5.5 Pump.

Includes:

(1) 40273-001 Fitting, barbxmnpt, PVC, 1″
(1) 40156-001 Fitting, barbxfnpt, PVC, 3/4″

The post Barb Kit for March TE5.5 appeared first on Flagship Marine.

Barb Kit for March LC-3

admin — Mon, 21 Dec 2020 18:47:05 +0000

Barb Kit for the March LC-3 Pump.

Includes:

(1) 40159-001 Fitting, barbxmnpt, PVC, 3/4″
(1) 40009-001 Fitting, barbxfnpt, PVC, 1/2″

The post Barb Kit for March LC-3 appeared first on Flagship Marine.

Barb Kit for March LC-2

admin — Mon, 21 Dec 2020 18:42:53 +0000

Barb Kit, March LC-2

Includes:

(1) 40156-001 Fitting, barbxfnpt, PVC, 3/4″
(1) 40009-001 Fitting, barbxfnpt, PVC, 1/2″
(1) 40269-001 Fitting, bushing, 1/2×1/4″, PVC

The post Barb Kit for March LC-2 appeared first on Flagship Marine.