Economical March LC-5C-MD Replacement Pump with a 115 or 230 volt motor.

Features & Benefits Of Our SPM1000 115 or 230 Marine Coolant Pumps

• To withstand thermal overloads without failure, the pump has run dry protection. Finally when cooled, the pump will resume operating normally.
• Polypropylene, Buna N and Ceramic Magnet make up the wet end materials exposed to liquids. When submerged, Epoxy, Stainless Steel, Polysulfone, and also the Cord will come in contact with the solution.
• The inlet connection is a ¾” female pipe thread and the outlet is ½” male pipe thread.
• Includes fully integrated, heavy duty marine base and also the original base in contrast to other pumps.
• The motor is a 1 Phase 115V or 230V, 1/8 Horsepower motor, running on either 50 or 60 HZ. The pump is not self-priming and requires flooded suction.
• Maximum internal pressure is 25 PSI and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius.
• The magnetically driven SPM1000-115 or 230 volt pump with no shaft seal is our core model. In open air or furthermore, fully submerged, the PM500 pumps as a result offer complete moisture protection due to being epoxy coated. When re-assembling the pump for service also make sure all “O” Rings are properly seated.
• ISO 8846 Marine Ignition Protection.
• NMMA, USCG and SAE J1171:2016

Applications

Most commonly used on your boat for marine air conditioning while circulating seawater.

Koolair Pumps | Run Dry Protection To Keep You Cool.

The post KoolAir Marine Coolant Pump SPM1000 appeared first on Flagship Marine.

Perfect economical replacement for March AC-5C-MD Pump 115 or 230 volt model.

Features & Benefits Of Our PM1000 Marine Coolant Pumps

• Run Dry Protection is how to withstand thermal overloads without failure. When cooled, the pump will resume operating normally.
• Materials exposed to the solution (wet end) are Reinforced Polypropylene, Buna N and Ceramic Magnet. When submerged, Epoxy, Stainless Steel, Polysulfone, and the Cord will also come in contact with the solution.
• The inlet connection is a 1” female pipe thread and the outlet is ½” male pipe thread.
• Includes fully integrated, heavy duty, Epoxy coated marine base, as well as the original base.
• The motor is a 1 Phase 115V, 1/8 Horsepower motor, running on either 50 or 60 HZ.
• Maximum internal pressure is 50 PSI and the maximum liquid temperature is 180 Fahrenheit or 82 Celsius.
• The hardened Carbon bushing allows for extended run dry time as a result without any damage to the pump head. See the parts diagram for assembly instructions. Trimming of the impeller is possible to modify flows or compensate for liquids of higher viscosity.
• ETl Listed

Applications

Most commonly used on your boat or yacht for marine air conditioning while circulating seawater.

The post KoolAir Marine Coolant Pump PM1000 appeared first on Flagship Marine.

Replaces March LC-3CP-MD Pump with a 115 or 230 volt motor.

500 GPH (Gallons Per Hour).

Features & Benefits Of Our PM500 115 or 230 Marine Coolant Pumps

• To withstand thermal overloads without failure, the pump has run dry protection. Finally when cooled, the pump will resume operating normally.
• Polypropylene, Buna N and Ceramic Magnet make up the wet end materials exposed to liquids. When submerged, Epoxy, Stainless Steel, Polysulfone, and also the Cord will come in contact with the solution.
• The inlet connection is a ¾” female pipe thread and the outlet is ½” male pipe thread.
• Includes fully integrated, heavy duty marine base and also the original base in contrast to other pumps.
• The motor is a 1 Phase 115V or 230V, .05 Horsepower motor, running on either 50 or 60 HZ.
• The pump is not self-priming and requires flooded suction.
• Maximum internal pressure is 25 PSI and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius.

Applications

Most commonly used on your boat or yacht for marine air conditioning while circulating seawater.

Koolair Pumps | Run Dry Protection To Keep You Cool.

The post KoolAir Marine Coolant Pump PM500 appeared first on Flagship Marine.

Similarly replaces March AC-5C-MD Pump.

1000 GPH (Gallons Per Hour).

Features & Benefits Of Our TPM1000 Marine Coolant Pumps

• To withstand thermal overloads, hence without failure, the pump is run dry protected. The pump end most is certainly protected from thermal meltdown in a run dry event.
• Materials exposed to the solution (wet end) are Reinforced Polypropylene, Buna N and Ceramic Magnet.
• The inlet connection is a 1” FPT and the outlet is ½” MPT.
• Includes fully integrated, heavy duty base.
• The motor is a 1 Phase, Dual 115/230 Volt, 1/8 HP motor on either 50 or 60 HZ.
• Maximum internal pressure is 50 PSI.
• The maximum liquid temperature is 180 F or 82 C.
• The pump is not self-priming and requires flooded suction.
• ISO 8846 Marine Ignition Protected.

Applications

Most commonly used on your boat or yacht for marine air conditioning while circulating seawater.

Koolair Pumps | Run Dry Protection To Keep You Cool.

The post KoolAir Marine Coolant Pump TPM1000 appeared first on Flagship Marine.