Description
March Pump’s industrial AC-5M-MD is an American seal-less centrifugal magnetic drive pump ideal for marine applications. It is capable of generating a maximum flow of 17 gallons per minute at 1 feet, and its maximum head is 27 Feet (11PSI). It is capable of 48,000 BTU a hour. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Noryl, Buna N, Carbon, 316 Stainless Steel, Ceramic, and Ceramic Magnet. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius.
The pump is Ignition Protected per SAE J1171 and ISO 8846. The impeller has a carbon bushing allowing the pump to run dry longer before suffering damage.
System: 60Hz
US Metric
Max Flow: 17 GPM 64.4 LPM
Max Head: 27 FT 8.2 M
Power: 0.125 HP 0.093 KW
System: 50Hz
US Metric
Max Flow: 15.9 GPM 60 LPM
Max Head: 19.7 FT 6 M
Power: 0.125 HP 0.093 KW
Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 1″FPT
Outlet: 1/2″MPT
Wet End: Polypropylene (Rear Housing, Impeller), Noryl (Front Housing) Buna N (O-Ring), 316 Stainless Steel (Shaft), Carbon (Impeller Bushing) Ceramic (Thrust Washers), Ceramic Magnet
Max Internal Pressure: 50 PSI / 3.4 bar
Max Liquid Temperature: 190 °F / 87 °C
Ignition Protected per SAE J1171 and ISO 8846: UL Listed Motor
Note: Product image may be different than actual product received.
