Flagship marine 48,000 BTU’S Chiller. These units are specially designed for yachts or boats with independent areas. It features a dry drain pan, Flagship exclusive diagnostic monitors, electrical box, all 316 marine grade stainless steel components, copper-nickel alloy condenser tubes, and more.
Made with pride in the USA.
Manual & Drawings: Click Here
| Weight | 179 lbs |
|---|---|
| Dimensions | 25 × 15.5 × 23 in |
No more mold and mildew starting in your drain pan. Flagship now manufactures sloped aluminum drain pans that are dry so the condensate water doesn’t have a chance to grow mold and mildew.
All sheet metal components are laser cut with aircraft/military quality tolerances in the ten-thousandths of an inch range as depicted here with the skeleton of an air-cooled chiller. Note the PEM nut inserts and numerous stainless steel rivets that result in a very rigid, strong, and exacting structure.
No highly trained technician needed, typically a voltmeter and a screwdriver are all that is needed to make the most repairs!
All Flagship Chillers have a low voltage control module with clearly labeled LEDs advising the end user specifically what has tripped the chiller, be it high or low refrigerant pressure, freeze control protection as well as low chilled water flow.
What sets Flagship Marine apart from our competition is our belief in the KISS principle (Keep It Simple, Stupid). This has guided our component selection and design emphasis for many years. We brag that even a child can follow our schematics!
Look at this single compressor chiller electric box. All the components are “over the counter” at a fraction of typical costs in our industry. The most expensive item here is less than $53.00!
The heart of every marine air conditioner is the condenser—the heat sink to the ocean and the only component the corrosive sea water touches is the inside of the inside tube. Failure of this tube is catastrophic for the entire system. Even extremely corrosive places like the very high salinity of the Red Sea are no problem for Flagship Marine condensers because we use an unusually thick-walled 90/10 CuNi (copper-nickel) tube with particular annealment, hardness, and other characteristics.
| Model | FM48CW |
| BTU’S of Cooling | 48,000 |
| Dimensions | 25″ L x 15.5″ W x 23″ H |
| Amps (Cool) | 22 |
| Phase | 1 |
| Cycle | 60 Hz |
| Weight Lbs/kg | 179/81 |
Chillers Water Cooled
Inquire Form
Chillers Water Cooled
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Water Cooled Chillers
Inquire Form
Self Contained Air Cooled Chillers
Inquire Form
Self Contained Air Cooled Chillers
Inquire Form
Self Contained Air Cooled Chillers
Inquire Form
Self Contained Air Cooled Chillers
Inquire Form
Self Contained Air Cooled Chillers
Inquire Form
Chillers Water Cooled
Inquire Form
Chillers Water Cooled
Inquire Form
Chillers Water Cooled
Inquire Form
Chillers Air Cooled
Inquire Form
Chillers Air Cooled
Inquire Form
Chillers Air Cooled
Inquire Form
Chillers Water Cooled
Inquire Form
Chillers Water Cooled
Inquire Form
Chillers Water Cooled
Inquire Form
Chillers Water Cooled
Inquire Form
