Shop

  • The Isotemp BASIC line of Stainless Steel Marine Water Heaters comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater. The Basic line is characterized by a larger diameter (16 inches) and shorter length. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.

    Retail Price: $1,540

    Error: Contact form not found.

  • The Basic 40 and Basic 75 are the only two models that have the double engine heat exchanger option.  The double coil is sometimes used by boaters who have hydronic heating to maximize use of the heating.  They are often used in conjunction with two engines such as a main engine and a generator to take advantage of the surplus heat provided by two separate sources.

    Retail Price: $1,030

    Error: Contact form not found.

  • Isotemp SLIM Stainless Steel Marine Water Heaters are specifically designed for use in the demanding marine environment.  Isotemp SLIM features a brushed stainless steel cover and a 316-grade stainless steel inner tank that is backed by a 5-year limited warranty against leakage due to corrosion or manufacturing defect. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.

    Retail Price: $1,030

    Error: Contact form not found.

  • Isotemp SLIM Stainless Steel Marine Water Heaters are specifically designed for use in the demanding marine environment.  Isotemp SLIM features a brushed stainless steel cover and a 316-grade stainless steel inner tank that is backed by a 5-year limited warranty against leakage due to corrosion or manufacturing defect. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.

    Retail Price: $1,070

    Error: Contact form not found.

  • Isotemp SLIM Stainless Steel Marine Water Heaters are specifically designed for use in the demanding marine environment.  Isotemp SLIM features a brushed stainless steel cover and a 316-grade stainless steel inner tank that is backed by a 5-year limited warranty against leakage due to corrosion or manufacturing defect. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.

    Retail Price: $1,150

    Error: Contact form not found.

  • Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top. The Isotherm Compact Classic is an air cooled compressor unit designed for simple installation in existing top or side-loaded refrigerator boxes. It uses a Danfoss Compressor to cool an evaporator fitted in your refrigerator box. Air-cooling is a traditional way of removing heat with a condenser where air is blown through by a fan. It is important that the compressor compartment is ventilated so that cool air enters from below and hot air is allowed to escape above. The lower in the boat the compressor is installed the more the surrounding air is chilled by the outside water. Two styles of evaporator are used, round and flat. The evaporator can be fitted in any position, and requires an installation opening of only 1-3/16" in the refrigerator wall. The temperature is adjusted by a thermostat which also has an ON-OFF switch. These units provide refrigerator capability with temperatures down to 36°F; except model 2017 has freezer capabilitiy (to 7°F) for a separated chamber. • All units come as complete pre-filled "do it yourself" kits • Amperage shown is with refrigerator filled to one half capacity • Cooling/venting fan included • Evaporator: O-shaped; model 2017 is flat and can be bent to fit • Compressor dimensions: 10.63"L x 6.31"W x 6.13"H (model 2017 is 12.44" long) • Weight: 20 lbs. (except model 2017 is 26 lbs.)

    Retail Price: $1,261

    Error: Contact form not found.

  • Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top.

    Retail Price: $1,070

    Error: Contact form not found.

  • Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top.

    Retail Price: $1,101

    Error: Contact form not found.

  • Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top.

    Retail Price: $1,104

    Error: Contact form not found.

  • Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top.

    Retail Price: $1,183

    Error: Contact form not found.

  • Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top.

    Retail Price: $1,322

    Error: Contact form not found.

  • Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top. U400X133P12111AA

    Retail Price: $1,460

    Error: Contact form not found.

Title

Go to Top