Retail Price: $1,504
Error: Contact form not found.
-
The CR 65 Freezer is a 65 liters volume freezer with extra thick insulation. It is equipped with one shelf and a bin at the bottom. The CR 65 F is delivered with a fan-cooled compressor. -
The Isotherm Cruise 90 Freezer is a large 3.1 cubic foot under counter freezer proving four shelves of freezer storage. Each shelf has a separate access hatch to help hold in the cold. The Cruise 90 Freezer has the same outside dimensions as the CR130 Drink fridge and makes a perfect pairing in a side-by-side installation. As a deep freezer, the CR90 will operate at temperatures of zero degrees F. Like all Classic models, the panel of the door can be removed and replaced with your custom veneer panel.Retail Price: $1,607
Error: Contact form not found.
-
The CR 65 Freezer is a 65 liters volume freezer with extra thick insulation. It is equipped with one shelf and a bin at the bottom. The CR 65 F is delivered with a fan-cooled compressor.Retail Price: $1,661
Error: Contact form not found.
-
The CR 63 Freezer has the same outside dimensions as CR 85 fridge. Therefore these units can be perfectly mounted side by side. CR 63 F is equipped with two shelves and a bin at the bottom. It has a corner-mounted compressor and the evaporator piping is integrated in the walls.Retail Price: $1,740
Error: Contact form not found.
-
The BI 40 is a built-in refrigerator box. It is equipped with an L-shaped evaporator. The fan-cooled compressor is mounted on the side. The BI 40 is also available with ASU. Other compressor options as SP or Magnum are also available.Retail Price: $1,185
Error: Contact form not found.
-
The BI 41 is a refrigerator or freezer box with stainless steel inner lining, plastic bottom section and a wire basket. It offers a range of +10 °C to -10 °C. The fan-cooled compressor is mounted on the side, or easily repositioned up to 1.5 meter away. Other compressor options as SP or Magnum are also available.Retail Price: $1,320
Error: Contact form not found.
-
The BI 53 F is a built-in freezer box with stainless steel inner lining, plastic bottom section and a wire basket. It offers a range of 0 °C to -20 °C and is equipped with interior light. Its fan-cooled compressor unit is mounted below but easily repositioned up to 1.5 meters away. Other compressor options as SP or Magnum are also available.Retail Price: $2,225
Error: Contact form not found.
-
The BI 75 is a built-in fridge box with stainless steel inner lining, plastic bottom section and one wire basket. It is equipped with interior light. Its fan-cooled compressor unit is mounted below but easily repositioned up to 1.5 meter away. Other compressor options as SP or Magnum are also available.Retail Price: $1,893
Error: Contact form not found.
-
The BI 92 is a built-in fridge or freezer box with stainless steel inner lining, plastic bottom section and three wire baskets. It offers a range of +10 °C to -20 °C and is equipped with interior light. Its fan-cooled compressor unit is mounted below but easily repositioned up to 1.5 meter away.Retail Price: $3,641
Error: Contact form not found.
-
The Built-In 172 DUAL is a combined cooling solution 130 liter fridge & 38 liter freezer or 172 liter fridge only, capable to work on a multiple use base. It is a fridge/freezer or a fridge only device to be nicely integrated into a furniture assembly. The innovative concept at the base of the BI172 product development is modularity both in use and in application. It is possible to change the product’s functions according to the customer needs, since it has been specified to cover all market/customer requirements.Retail Price: $3,093
Error: Contact form not found.
-
High class in your glass! The Isotherm Clear Ice Maker uses the spray technology to offer you fresh, clear ice. The Isotherm Clear Ice Maker is a compact, spray‐type, ice maker that will produce up to 40 pounds of crystal‐clear ice per day. The Isotherm Clear Ice Maker has a deep water reservoir designed to work in a mobile environment where other clear ice makers will not. The ice produced is a barrel‐shaped, crystal‐clear, 'top hat' ice that is very dense and slow‐melting. Clear ice does not have air trapped in it like conventional white, crescent‐shaped ice. Conventional ‘white ice’ releases freezer air in drinks as it melts and changes the flavor of drinks. The Isotherm Clear Ice does not change the flavor of drinks, so whether you’re drinking water, sodas, or cocktails, you’ll get the pure flavor of the drink. The spray-type clear ice maker stores ice in an insulated bin, not a freezer, so the ice is always a loose ice. The Clear Ice Maker requires a drain. Also, Clear Ice Makers make the sound of spraying water. NOTE: The Isotherm Clear Ice Maker must not be installed where it may get wet. Proper ventilation is critical to trouble-free operation.Retail Price: $2,202
Error: Contact form not found.
-
The Isotherm White Ice Maker is a robust ice maker built for the marine environment. With a white, proud-mount door, this model of the White Ice Maker allows installation in cabinets with shallower depth.
The White Ice Maker produces approximately 22 pounds of white, crescent-shaped ice per day and holds approximately 11 pounds in a removable bin.
Retail Price: $1,880
Error: Contact form not found.
-
The Isotherm White Ice Maker is a robust ice maker built for the marine environment. With a white, proud-mount door, this model of the White Ice Maker allows installation in cabinets with shallower depth. Good looks and rugged dependability distinguish this ice maker, which features a marinized design for long life in the marine environment. White ice technology produces up to 22lbs. of crescent-shaped white ice per day and stores up to 12lb. of ice in the included bin. Installation is simplified by the front intake and exhaust. Stainless steel door.
- Power Requirements: 115V 60Hz AC only
- Door: Right hinged, reversible
- Plumbing Connections: Female garden hose connection; No drain required
- Wiring Connections: 6-1/2’ powercord with three prong plug
- Dimensions: 24 7/8”H x 14 3/4”W x 17 1/4”D
- Approvals: CE
- Warranty: Five years limited on compressor; Two years on parts
Retail Price: $2,080
Error: Contact form not found.
-
The Isotherm Low Profile White Ice Maker is a robust ice maker built for the marine environment. With a 316 grade brushed stainless steel door, this model of the White Ice Maker allows installation in a location with lower height dimensions.
The White Ice Maker produces approximately 22 pounds of white, crescent-shaped ice per day and holds approximately 11 pounds in a removable bin.
Retail Price: $1,980
Error: Contact form not found.
-
The BI 29 Ice maker is a versatile ice maker designed to meet demanding applications where the ice maker height or placement is the primary consideration.
The BI29 is a top access ice maker with a remote mountable compressor. This can allow the unit to be built into counter top in the bar area for quick access to traditional crescent-shaped, white ice.
Installation in limited spaces such as under a seat can be achieved with the BI29 Ice Maker thanks to the optional slide rails that make it easy to side the entire ice maker out to access the ice. In this configuration, the compressor would remain mounted on the body of the ice maker so that it moves as one unit.
Retail Price: $2,435
Error: Contact form not found.
-
Isotemp SLIM Stainless Steel Marine Water Heaters are specifically designed for use in the demanding marine environment. Isotemp SLIM features a brushed stainless steel cover and a 316-grade stainless steel inner tank that is backed by a 5-year limited warranty against leakage due to corrosion or manufacturing defect. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.Retail Price: $1,030
Error: Contact form not found.
-
Isotemp SLIM Stainless Steel Marine Water Heaters are specifically designed for use in the demanding marine environment. Isotemp SLIM features a brushed stainless steel cover and a 316-grade stainless steel inner tank that is backed by a 5-year limited warranty against leakage due to corrosion or manufacturing defect. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.Retail Price: $1,070
Error: Contact form not found.
-
Isotemp SLIM Stainless Steel Marine Water Heaters are specifically designed for use in the demanding marine environment. Isotemp SLIM features a brushed stainless steel cover and a 316-grade stainless steel inner tank that is backed by a 5-year limited warranty against leakage due to corrosion or manufacturing defect. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.
Retail Price: $1,150
Error: Contact form not found.
-
The Isotemp BASIC line of Stainless Steel Marine Water Heaters comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater. The Basic line is characterized by a larger diameter (16 inches) and shorter length. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.Retail Price: $1,030
Error: Contact form not found.
-
The Isotemp BASIC line of Stainless Steel Marine Water Heaters comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater. The Basic line is characterized by a larger diameter (16 inches) and shorter length. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.Retail Price: $1,240
Error: Contact form not found.
-
The Isotemp BASIC line of Stainless Steel Marine Water Heaters comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater. The Basic line is characterized by a larger diameter (16 inches) and shorter length. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.
Retail Price: $1,310
Error: Contact form not found.
-
The Isotemp BASIC line of Stainless Steel Marine Water Heaters comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater. The Basic line is characterized by a larger diameter (16 inches) and shorter length. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.
Retail Price: $1,390
Error: Contact form not found.
-
The Isotemp BASIC line of Stainless Steel Marine Water Heaters comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater. The Basic line is characterized by a larger diameter (16 inches) and shorter length. Isotemp Stainless Steel Water Heaters achieve the highest capacity by optimizing the position of the engine water heat exchanger as well as the electrical immersion heater. These are positioned in the lowest part of the tank where the water is coldest in order to ensure an equal heating of all the water in the tank. The water inlets and outlets are specially designed to minimize the mixture of cold and hot water.Retail Price: $1,540
Error: Contact form not found.
-
The Isotemp Slim Square Stainless Steel Marine Water Heater comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater.Retail Price: $1,374
Error: Contact form not found.
-
The Basic 40 and Basic 75 are the only two models that have the double engine heat exchanger option. The double coil is sometimes used by boaters who have hydronic heating to maximize use of the heating. They are often used in conjunction with two engines such as a main engine and a generator to take advantage of the surplus heat provided by two separate sources.
Retail Price: $1,430
Error: Contact form not found.
-
The Basic 40 and Basic 75 are the only two models that have the double engine heat exchanger option. The double coil is sometimes used by boaters who have hydronic heating to maximize use of the heating. They are often used in conjunction with two engines such as a main engine and a generator to take advantage of the surplus heat provided by two separate sources.Retail Price: $1,030
Error: Contact form not found.
-
The Isotemp SPA Stainless Steel Marine Water Heaters are available in 5 sizes ranging from 15 to 40 liters capacity (15, 20, 25, 30 & 40 liters).
All Isotemp tanks come standard with the innovative Isotemp Temperature Control Safety Mixing Valve which protects users from scalding hot water. Water heated with engine heat exchangers can be heated to 190 degrees or more which can scald those unfamiliar with boat water heaters. Water will also be heated to 160+ degrees with just the electric heating element alone. By adjusting the valve, the Isotemp thermostat-controlled mixing valve mixes the boat’s water with the hot water to deliver the temperature you want at the faucet. This mixing action also speeds recovery time and extends the volume of hot water you get from a smaller tank.115v: Retail Price: $816
230v: Retail Price: $854
Error: Contact form not found.
-
The Isotemp SPA Stainless Steel Marine Water Heaters are available in 5 sizes ranging from 15 to 40 liters capacity (15, 20, 25, 30 & 40 liters).
All Isotemp tanks come standard with the innovative Isotemp Temperature Control Safety Mixing Valve which protects users from scalding hot water. Water heated with engine heat exchangers can be heated to 190 degrees or more which can scald those unfamiliar with boat water heaters. Water will also be heated to 160+ degrees with just the electric heating element alone. By adjusting the valve, the Isotemp thermostat-controlled mixing valve mixes the boat’s water with the hot water to deliver the temperature you want at the faucet. This mixing action also speeds recovery time and extends the volume of hot water you get from a smaller tank.115v: Retail Price: $858
230v: Retail Price: $899
Error: Contact form not found.
-
The Isotemp SPA Stainless Steel Marine Water Heaters are available in 5 sizes ranging from 15 to 40 liters capacity (15, 20, 25, 30 & 40 liters).
All Isotemp tanks come standard with the innovative Isotemp Temperature Control Safety Mixing Valve which protects users from scalding hot water. Water heated with engine heat exchangers can be heated to 190 degrees or more which can scald those unfamiliar with boat water heaters. Water will also be heated to 160+ degrees with just the electric heating element alone. By adjusting the valve, the Isotemp thermostat-controlled mixing valve mixes the boat’s water with the hot water to deliver the temperature you want at the faucet. This mixing action also speeds recovery time and extends the volume of hot water you get from a smaller tank.115v: Retail Price: $892
230v: Retail Price: $936
Error: Contact form not found.
-
The Isotemp SPA Stainless Steel Marine Water Heaters are available in 5 sizes ranging from 15 to 40 liters capacity (15, 20, 25, 30 & 40 liters).
All Isotemp tanks come standard with the innovative Isotemp Temperature Control Safety Mixing Valve which protects users from scalding hot water. Water heated with engine heat exchangers can be heated to 190 degrees or more which can scald those unfamiliar with boat water heaters. Water will also be heated to 160+ degrees with just the electric heating element alone. By adjusting the valve, the Isotemp thermostat-controlled mixing valve mixes the boat’s water with the hot water to deliver the temperature you want at the faucet. This mixing action also speeds recovery time and extends the volume of hot water you get from a smaller tank.115v: Retail Price: $894
230v: Retail Price: $942
Error: Contact form not found.
-
The Isotemp SPA Stainless Steel Marine Water Heaters are available in 5 sizes ranging from 15 to 40 liters capacity (15, 20, 25, 30 & 40 liters).
All Isotemp tanks come standard with the innovative Isotemp Temperature Control Safety Mixing Valve which protects users from scalding hot water. Water heated with engine heat exchangers can be heated to 190 degrees or more which can scald those unfamiliar with boat water heaters. Water will also be heated to 160+ degrees with just the electric heating element alone. By adjusting the valve, the Isotemp thermostat-controlled mixing valve mixes the boat’s water with the hot water to deliver the temperature you want at the faucet. This mixing action also speeds recovery time and extends the volume of hot water you get from a smaller tank. 6P4023SPA0003Retail Price: $960
Error: Contact form not found.
-
Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top.Retail Price: $1,106
Error: Contact form not found.
-
Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top.
Retail Price: $1,147
Error: Contact form not found.
-
Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top. The Isotherm Compact Classic is an air cooled compressor unit designed for simple installation in existing top or side-loaded refrigerator boxes. It uses a Danfoss Compressor to cool an evaporator fitted in your refrigerator box. Air-cooling is a traditional way of removing heat with a condenser where air is blown through by a fan. It is important that the compressor compartment is ventilated so that cool air enters from below and hot air is allowed to escape above. The lower in the boat the compressor is installed the more the surrounding air is chilled by the outside water. Two styles of evaporator are used, round and flat. The evaporator can be fitted in any position, and requires an installation opening of only 1-3/16" in the refrigerator wall. The temperature is adjusted by a thermostat which also has an ON-OFF switch. These units provide refrigerator capability with temperatures down to 36°F; except model 2017 has freezer capabilitiy (to 7°F) for a separated chamber. • All units come as complete pre-filled "do it yourself" kits • Amperage shown is with refrigerator filled to one half capacity • Cooling/venting fan included • Evaporator: O-shaped; model 2017 is flat and can be bent to fit • Compressor dimensions: 10.63"L x 6.31"W x 6.13"H (model 2017 is 12.44" long) • Weight: 20 lbs. (except model 2017 is 26 lbs.)Retail Price: $1,261
Error: Contact form not found.
-
Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top.
Retail Price: $1,288
Error: Contact form not found.
-
Using air which is blown through the condenser by a fan is the traditional way to remove the heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top.
Retail Price: $1,425
Error: Contact form not found.
