Rooftop AC

120V Domestic Units | 240V International Units



Flagship Marine is a Worldwide Distributor for the SeaMach and other fine RVP Coleman® - Mach® products. SeaMach Air Cooled Marine Rooftop a/c -13,500 BTUs of cooling with heat, ceiling assembly, controls, and installation kit.

• Attractive interior ceiling assembly distributes air fore, aft, and downward
• Water seal rubber compression gasket
• Hi Cool - Low Cool - Heat - Off and thermostat control switches
• Safe and reliable electric heating element
• Complete installation hardware kit
• Detailed and easy to follow installation manual

$1,139.95
Includes rooftop unit, ceiling assembly, heat kit and shipping.
BUY NOW

New from Coleman: The Chill Grille

Standard on all SeaMachs we sell is a heat ready ceiling assembly featuring adjustable louvers designed to direct chilled air downwards into the cabin in any direction. When the louvers are closed, cool air is directed forward and aft through the front and rear airflow dampers.
Operation and control knobs are positioned on the horizontal surface for easy access and the pop-out retainer grille makes for easy, tool-free access to the washable air filters. The sleek styling provides a contemporary look and feel. When replacing an earlier ceiling assembly the Chill Grille is designed to cover the existing imprints.

Specifications & Details

BTUH Nominal Capacity
Cooling…………………………………..13,500
Heating…………………………………….5,600
Electrical rating…..115VAC, 60Hz, 1 Phase
Cooling full load amps
Compressor…………………………………11.5
Fan Motor…………………low: 2.8, High 3.4
Total………………………………………….14.9
Heating full load amps……………………16.1
Running Watts (Cooling- low)………..1,680
Running Watts (Cooling- high)……….1,875
Running Watts (Heating)……………….1,900
Compressor Locked rotor amps…………..67
Compressor Ohm ratings
Common/start……………………………..3.38
Common/run………………………………..0.6
Thermostat temperature range
Cooling………………….61°F +/-5 minimum
Heating………………….85°F +/-5 maximum
Metering device………………Capillary Tube
Refrigerant Charge…………………..17.5 Oz
Refrigerant Type………………………..R-410A
Evaporator air delivery……………330 CFM
Dimensions:
Exterior shroud -
13.25" high x 29" wide x 43" long
Interior ceiling assembly -
2.1"high x 19.9"wide x 20.1"long
Ceiling cutout opening size - 14" x 14"
Installed weight………………………104 lbs

Turn your boat's cabin into a cool refuge from the heat of the day with a SeaMach Marine Air Conditioner - manufactured by the legendary industry leader - RVP - Coleman® Mach®.
Built with extra protection against the vibration and saltwater corrosion that comes with the territory on a boat, the SeaMach is an investment in quality you can rely on, season after season.
SeaMach features a powerful 13,500 BTU cooling capacity, a quiet, high-efficiency rotary compressor with a very low start upsurge, and it can be equipped with an Elect-A-Heat option that will take the chill off your cabin on cooler outings.
Manufactured by the longtime industry leader for recreational vehicles and off-road RV applications, SeaMach is tough enough to give you years of cool comfort below deck.

Here's what makes SeaMach a sea-worthy performer - unique and highly superior to a standard rooftop unit

• The blower motor features a stainless steel shaft and plastic fan blade rather than steel and is totally enclosed in an epoxy coated housing.
• Plastic drain pan rather than steel.
• Baked enamel-coated condensers that protect the aluminum fins from deterioration rather than naked aluminum condenser fins.
• Flexible refrigeration hoses provide better shock protection rather than a pipe with soldered joints that can break under stress.
• The compressor is supported to withstand the impact forces a moving vessel will encounter.
• All exposed sheet metal parts are electrostatically powder-coated rather than baked enamel.
•Hard start capacitor makes starting much easier on your vessel's power supply and generator.
• Simple to install with common hand tools - one 14" square opening - one power supply wire!
• MagnaGard screws are chemically treated to resist corrosion.
• Dow Corning protective agent seals all exposed metal parts.
• Raised-lance fins on the coils increase the surface area available for heat transfer, enhancing the efficiency of the cooling process.
• Quiet, easy to start, rugged and efficient rotary compressor.
• New and improved hail and UV resistant polyethylene exterior shroud



240V International Unit

$899.95
Includes rooftop unit, ceiling assembly, and heat kit. 
+$180 shipping to lower 48 US

International Mach Series Specifications:
Dimensions - Exterior shroud - 43" L x 29" W x 13.25" H,
Dimensions - Interior shroud - 26" L x 22.5" W x 3" H
Weight - 107.5 lbs with interior shroud
Shipping dimensions - 1 pallet - 45" x 31" x 20" H
Shipping weight - 140 lbs
Ceiling cut out - 14" x 14"
Maximum allowable offset from level, front to back and side to side - 15°
Refrigerant type - R407C (zero ozone-depleting)
Refrigerant charge - 8373 - 12.75oz., model 8473 (heavy duty) - 15.0 oz.
Metering device - Capillary tube
Evaporator air delivery - 320 CFM - 543.7 CMH
Capacity (Nominal BTUH) - Cooling = 13,500 BTU, Heating 5,600 BTU
Electrical rating - 240 VAC @ 50HZ, single phase. This unit is rated @50HZ, however, we have many years of experience running them on 60HZ without any problems, however, it is not sanctioned by the manufacturer.
App. current - Cooling 1,687 (7Amp) min -2,117 (9Amp) max, Heating 1,800 (7.5Amp)
Compressor locked rotor amps - 32.0
BUY NOW